background image

H

EDGE

 C

LIPPER

O

PERATOR

'

S

 M

ANUAL

3

INTERNATIONAL

 

SYMBOLS

IMPORTANT
The enclosed message provides
information necessary for the protec-
tion of the unit.

Throughout this manual and on the product itself, you will find safety
alerts and helpful, informational messages preceded by symbols or key
words.  The following is an explanation of those symbols and key
words and what they mean to you.

S

AFETY

MANUAL

 

SAFETY

 

SYMBOLS

 

AND

 

IMPORTANT

 

INFORMATION

This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can lead
to serious personal injury to operator and bystanders.

The circle with the slash symbol means whatever is shown
within the circle is prohibited.

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and understand

owners manual.

Wear eyes, ears and

head protection

Emergency stop

Fuel and oil mixture

Finger Severing

Carburetor   adjustment

- Low speed mixture

Safety/Alert

Avoid all power

lines. This unit is not

insulated against

electrical current.

Do not operate clos-

er than 15 M (50 ft.)

from electrical haz-

ards.

Plan retreat path

from falling

objects.

Wear hand protec-

tion. Use two handed.

DO NOT SMOKE

NEAR FUEL.

DO NOT ALLOW

FLAMES OR

SPARKS NEAR

FUEL.

Wear slip resistant

foot wear.

Ignition

Ignition

ON/OFF

Do not operate
without guards

in place.

Keep bystanders at least

4.5 meters (15 feet) away.

Primer bulb

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)

NOTE
This enclosed message provides tips for
use, care and maintenance of the unit.

WARNING  

  DANGER

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions
are not followed.  Proper clothing and safety gear must be worn when operating unit.

PERSONAL

 

CONDITION

 

AND

 

SAFETY

 

EQUIPMENT

Содержание HC-230





























Отзывы: