background image

4

P/N 89031744530

Shaft Decal

• This unit can be dangerous and cause serious injury if improperly

used. To reduce injury risk to operator, helpers and bystanders, read
and understand the Operator's and Safety manuals.

• Blindness can occur from objects that are thrown or ricocheted even

with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.

• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment.

Maintain a 15m (50 ft.) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.

• DO NOT INSTALL METAL BLADES ON GT (GRASS TRIMMER)

MODELS.

• Cutting attachment does not stop immediately after releasingthrottle.

Keep hands and feet clear of blade/cutting attachment unless engine
is shut off and cutting attachment is not moving.

WARNING  

  DANGER

WEAR HAND AND

FOOT PROTECTION

KEEP BYSTANDERS AND HELPERS

AWAY 15 M (50 FT.).

DO NOT USE

BLADES. STRING

LINE ONLY

DO NOT EXCEED

10,000 RPM.

DO NOT OPERATE

WITHOUT

GUARDS AND

SHIELDS IN

PLACE.

BEWARE

-  THROWN,

RICOCHET

OBJECTS

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

HOT

SURFACE

CARBURETOR

ADJUSTMENT

- IDLE SPEED

CARBURETOR

ADJUSTMENT
- HIGH SPEED

MIXTURE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

SYMBOL

DESCRIPTION/APPLICATION

SYMBOL FORM/

SHAPE

Read and understand

Operator's Manual.

WEAR EYES, EARS

AND HEAD

PROTECTION

EMERGENCY STOP

FUEL AND OIL

MIXTURE

FINGER SEVERING

CARBURETOR

ADJUSTMENT

- LOW SPEED

MIXTURE

SAFETY/ALERT

DO NOT SMOKE

NEAR FUEL.

DO NOT ALLOW

FLAMES OR

SPARKS NEAR

FUEL.

WEAR SLIP
RESISTANT

FOOT WEAR.

ENGINE CHOKE

CONTROL.

IGNITION

ON/OFF

PRIMER

BULB

INTERNATIONAL

 

SYMBOLS

Содержание GT-201EZR





























Отзывы: