3
Instructions:
1.
Put the receiver into the microphone port
or
3.5mm input of the amplifier speaker
or
other
audio equipment (use the extra jack plug included if the port is 6.35mm – this is a screw
fixture).
Please note: remove the silicone tip on the receiver jack before use.
* Ensure the volume of the device the EV200™ is being used with is set at minimum.
2.
Turn on the receiver power switch, the power indicator is flashing.
3.
Turn on the transmitter power switch, the power indicator is flashing and the transmitter and
receiver pair automatically. Once paired the power indicators will stop flashing and become a
steady light.
4.
Clip the transmitter to your belt and the microphone to your lapel.
5.
Adjust the volume button to a suitable sound.
Charging:
Insert the USB charging lead into the USB charger and plug the charger in a standard wall socket.
Switch off the transmitter and receiver. Insert the two Micro USB into each of the charge sockets on
the transmitter and receiver. The power on LED will be red whilst charging and will go off when fully
charged.
CAUTION
The power indicator is red when the power is low and it will turn off when the power is less than
10%. Please ensure the unit is returned to charge when the power indicator is red.
Replacement Parts
480-1005-02
Transmitter with Microphone
480-1006-02
Receiver
570-1012-01
USB 5V 2A Power Supply
-
USB Cable
-
Instructions
Technical Specifications
Frequency Range
2.4GHz
Frequency Response
20Hz-20KHz ± 3dB
Paired Method
Automatically Paired
Power Supply
Lithium
Current
0dBm < 70mA
Capsule Type
Condenser
Operation Distance
15m
Power Consumption
6 Hrs*
*NOTE - Results can vary depending on type of usage
