Echo DPB-310, Руководство оператора

Страница: 8 / 244

3. When you release the trigger, the speed of the machine
will slow down and stop.
5.2 STOP THE MACHINE
Figure 4.
1. When you release the trigger, the speed of the machine
will slow down and stop. If it does not stop even after
releasing the trigger, you can pull out the battery to stop
it, and ask your dealer for repair.
5.3 CRUISE CONTROL LEVER
1. Pull the cruise control lever to the "Rabbit" mark side to
increase the speed of the machine.
5.4 TURBO BUTTON
Figure 4
1. Push the turbo button, the machine is at the highest speed.
2. Release the turbo button, the machine is at the normal
speed.
5.5 OPERATION TIPS
• Blow around the outer edge of the unwanted materials to
prevent the unwanted materials from scattering.
• Use rakes and brooms to clear the unwanted material
before you blow.
• Make the surfaces wet before you clear the unwanted
material in dusty conditions.
• Look out for children, pets, open windows, and cleaned
cars during operation.
• Clean the machine.
• Discard the unwanted material when you complete work.
6 MAINTENANCE
WARNING
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components. Strong solvents or detergents can
cause damage to the plastic housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
6.1 CLEAN THE MACHINE
WARNING
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
• Banned washing
7 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
transportation and storage.
7.1 MOVE THE MACHINE
• Only hold the machine with the handgrip.
7.2 STORE THE MACHINE
• Clean the machine before storage.
• Make sure that the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person of an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.
8 TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor does
not start when
you pull the trig-
ger.
The battery pack is
not installed tight-
ly.
Make sure that
you tighlty install
the battery pack in
the machine.
The battery pack is
out of power.
Charge the battery
pack.
8
English Original Instructions
EN