DLM-2100
99922238025
30
© 09/2022 ECHO Incorporated
TROUBLESHOOTING
Problem
Cause
Solution
The lawn
mower is hard
to push.
The grass is too tall,
or the cutting height is
too low.
Raise the cutting height.
The rear of the grass
catcher bag is dragging
in thick grass.
Empty the grass clippings
from the grass catcher bag.
The lawn
mower is
excessively
noisy and
vibrates.
The motor shaft is
bent.
Stop the motor, and inspect
for damage. Contact your
dealer for repair.
The blade is
unbalanced.
Repair before restarting. If
vibration persists, contact
your dealer.
Number
of Beeps
Symptom
Remedy
1
Mower will not start. Consult authorized dealer.
2
Mower stops
running.
Allow mower to cool. If problem
persists, consult authorized dealer.
3
Mower will not start.
Check battery and terminals for corrosion
or debris. If problem persists, consult
authorized dealer.
4
Mower will start
then stop, or will
not start.
Start mower, at first not making a full cut,
then proceed to cut normally. If problem
persists, consult authorized dealer.
5
Mower will not start. Fully charge battery and try again. If
problem persists, consult authorized dealer.
6
Mower stops
running.
Allow battery to cool. If problem
persists, consult authorized dealer.
7
Mower will start
then stop, or will
not start.
Move mower to level ground and try
again. If problem persists, consult
authorized dealer.
8
Blade will not turn.
Remove batteries and safety key,
remove obstruction, try again.
9
Motor will not reach
full speed.
Start mower, at first not making a full cut,
then proceed to cut normally. If problem
persists, consult authorized dealer.