background image

7

DCS-5000

99922205708

© 08/2021 ECHO Incorporated

SAFETY

General Power Tool Safety Warnings

Read all safety warnings, instructions, illustrations and 

specifications provided with this power tool.

 

Failure to follow all 

instructions listed below may result in electric shock, fire and/or serious 

injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your battery operated 

(cordless) power tool.

Work Area Safety

• 

Keep work area clean and well lit.

 

Cluttered or dark areas invite 

accidents.

•  Do not operate power tools in explosive atmospheres, such as in 

the presence of flammable liquids, gases or dust. 

Power tools create 

sparks which may ignite the dust or fumes.

• 

Keep children and bystanders away while operating a power tool.

 

Distractions can cause you to lose control.

Electrical Safety

• 

Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will reduce risk of electric 

shock.

•  Avoid body contact with earthed or grounded surfaces, such as 

pipes, radiators, ranges and refrigerators.

 There is an increased risk of 

electric shock if your body is earthed or grounded.

• 

Do not expose power tools to rain or wet conditions. 

Water entering a 

power tool will increase the risk of electric shock.

• 

Do not abuse the cord. Never use the cord for carrying, pulling or 

unplugging the power tool. Keep cord away from heat, oil, sharp 

edges or moving parts.

 Damaged or entangled cords increase the risk of 

electric shock.

•  When operating a power tool outdoors, use an extension cord 

suitable for outdoor use. 

Use of a cord suitable for outdoor use reduces 

the risk of electric shock.

•  If operating a power tool in a damp location is unavoidable, use a 

RESIDUAL CURRENT DEVICE (RCD) protected supply. 

Use of an RCD 

reduces the risk of electric shock.

Содержание DCS-5000

















































Отзывы: