![background image](http://html.mh-extra.com/html/echo/dcs-310/dcs-310_operators-manual_531958008.webp)
Symbol
Explanation
Hold with both hands.
DANGER! Be careful with kickbacks.
Remove the battery pack before the
maintenance operations.
6
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL
MEANING
DANGER
Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING
Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.
IMPORTANT
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
NOTE
Added to give more informa-
tion.
7
RECYCLE
Separate collection. You must not discard
with usual household waste. If it is necessa-
ry to replace the machine, or if it is no more
use to you, do not discard it with household
waste.
Separate collection of used machine and
packaging let you recycle materials and use
them again. Use of the recycled materials
helps prevent environmental pollution and
decreases the requirements for raw materi-
als.
At the end of their useful life, discard batter-
ies with a precaution for our environment.
The battery contains material that is danger-
ous to you and the environment. You must
remove and discard these materials separate-
ly at a location that accepts lithium-ion bat-
teries.
8
INSTALLATION
WARNING
Do not change or use accessories that are not recommended
by the manufacturer.
WARNING
Do not install battery pack until you assemble all the parts.
8.1
UNPACK THE MACHINE
WARNING
Read the operator's manual carefully to ensure that you
assemble the product correctly. Using a product that has
been incorrectly assembled could lead to an accident or
serious injury.
WARNING
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact your dealer.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
8.2
ADD THE BAR AND CHAIN
LUBRICANT
Examine the amount of oil in the machine. If the oil level is
low, add the bar and chain lubricant as follows.
IMPORTANT
Use bar and chain lubricant that is only for chains and chain
oilers.
NOTE
The machine comes from the factory without bar and chain
lubricant.
1. Loosen and remove the cap from the oil tank.
2. Put the oil into the oil tank.
3. Monitor the oil indicator to make sure that no dirt enters
in the oil tank while you add the oil.
4. Put the oil cap on.
5. Tighten the oil cap.
6. The whole oil tank will last for 15 - 40 minutes.
9
English (Original Instructions)
EN
Содержание DCS-310
Страница 3: ...29 30 31 31 31 32 33 34 35 36 37 35 34 34 38 35 25 cm ...
Страница 126: ...YAMABIKO CORPORATION 127 Lietuvių k LT ...