![background image](http://html1.mh-extra.com/html/echo/cs-8000/cs-8000_operators-manual_4109459025.webp)
25
CS-8000 TYPE1-E
GUIDE BAR
• Clean before using.
- Clean the groove of the guide bar with a small
screwdriver.
- Clean oil holes with a wire.
• Check sprocket and the clutch and clean the bar
mount area before installation of the bar.
Replace either or both if worn.
SPROCKET
• A damaged sprocket will cause premature
damage or wear of saw chain.
- When the sprocket has worn out 0.5 mm (0.020
in.) or more, replace it.
• Check sprocket when you install new chain.
Replace it if worn.
CYLINDER FINS
• Check periodically.
• Clogged fins will result in poor engine cooling.
• Remove dirt and dust from between fins to let
cooling air pass easily.
MUFFLER SPARK ARRESTOR
• Remove air cleaner cover and remove spark
plug lead.
• Remove muffler lid, spark arrestor screen cover
and screen from muffler body.
• Clean carbon deposits from muffler components.
• Replace screen if it is cracked, or has holes
burned through.
• Assemble components in reverse order.
NOTE
Carbon deposits in muffler will cause drop in
engine output. Spark arrestor screen must be
checked periodically.
AUTOMATIC OILER
• The discharge volume of the automatic oiler is
adjusted to 8 mL/min approximately at 7000 r/min,
prior to shipment from factory.
- To increase the delivery volume, turn the
adjusting knob clockwise.
When the knob touches stopper and stops, this
position indicates maximum discharge volume.
(15 mL/min at 7000 r/min)
- Do not turn the adjusting knob beyond the
maximum or minimum limit of volume
adjustment.
Decrease
Increase
Adjusting knob
Groove
Oil hole
Worn : 0.5 mm (0.020 in.)
Cylinder fins
Screen cover
Spark arrestor screen
Muffler lid
Muffler
Clutch
(Sprocket)
Содержание CS-8000
Страница 30: ...30 CS 8000 TYPE1 E NOTES...
Страница 31: ...31 CS 8000 TYPE1 E NOTES...