Echo CS-7310PW Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 60

background image

CS-7310PW

OPERATION

X7503340600

25

© 12/20 ECHO Incorporated

OPERATION

Fuel

Diesel fuels and alternative fuels, such as E-15 (15% ethanol),
E-85 (85% ethanol) or any fuels not meeting ECHO requirements
are NOT approved for use in ECHO 2-stroke gasoline engines.
Use of diesel or alternative fuels can cause performance
problems, loss of power, overheating, fuel vapor lock, and
unintended machine operation, including, but not limited to,
improper clutch engagement. Diesel or alternative fuels can
also cause premature deterioration of fuel lines, gaskets,
carburetors and other engine components.

Fuel Requirements

Gasoline

- Use fresh (purchased within the last 30 days from the pump)

89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality.

Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE

(methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is

NOT

approved. Use of ECHO branded fuel is recommended to extend

engine life in all air-cooled 2-stroke and 2/4-stroke hybrid engines.

Two Stroke Oil

- A two-stroke engine oil, such as ECHO branded 2-stroke

oils, meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must

be used. ECHO branded 2-stroke oils meet these standards. Engine

problems due to inadequate lubrication caused by failure to use an

ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345-FD certified oil will void the

two-stroke engine warranty.

2-Stroke engine oil contains petroleum distillates and other
additives that may be harmful if swallowed. Heated oil can
release vapors that can cause flash fire, or ignite with explosive
force. Read and follow the oil manufacturer’s instructions, and
observe all safety warnings and precautions for handling
flammable liquids. For more detailed safety and first aid
information, visit www.echo-usa.com for a copy of the Material
Safety Data Sheet.

«
...
23
24
25
26
27
...
»

Содержание CS-7310PW





























































Отзывы:

Нет отзывов

Похожие инструкции для CS-7310PW

Бренд: Yard Machines Страницы: 74

Бренд: Fieldmann Страницы: 25

Бренд: Westfalia Страницы: 38

Бренд: Bushranger Страницы: 32

Бренд: Baumr-AG Страницы: 29

Бренд: Echo Страницы: 26

Бренд: Echo Страницы: 44

Бренд: 909 Страницы: 20

Бренд: EMAK Страницы: 226

Power Tools RD-ECS20X

Бренд: Raider Страницы: 38

Бренд: Kärcher Страницы: 444

Бренд: Feider Machines Страницы: 20

Бренд: Yardworks Страницы: 42

Бренд: ATIKA Страницы: 135

Бренд: Husqvarna Страницы: 8

Бренд: Husqvarna Страницы: 44

Бренд: Husqvarna Страницы: 42

Бренд: Husqvarna Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды