Echo CS-4920 Скачать руководство пользователя страница 4

Страница: 4 / 64

SERVICING INFORMATION

CS-4920

X7503352100

Service

Service of this product during the warranty period must be performed by an

Authorized ECHO Service Dealer. For the name and address of the

Authorized ECHO Service Dealer nearest you, ask your retailer or call:

1-800-432-ECHO (3246). Dealer information is also available on our Web

Site www.echo-usa.com. When presenting your unit for Warranty service/

repairs, proof of purchase is required.

ECHO Consumer Product Support

If you require assistance or have questions concerning the application,

operation, or maintenance of this product, call the ECHO Consumer

Product Support Department at 1-800-432-ECHO (3246) from 8:00 a.m. to

5:00 p.m. (Central Standard Time) Monday through Friday. Before calling,

please know the model and serial number of your unit.

Product Registration

out the product registration sheet included in this manual. Registering your

product confirms warranty coverage and provides a direct link to ECHO if

we find it necessary to contact you.

Additional Literature

In addition to finding information online, information is available from your

Authorized ECHO Service Dealer, or by contacting ECHO Incorporated,

400 Oakwood Road, Lake Zurich, IL 60047, 1-800-432-ECHO (3246).

Содержание CS-4920

































































Результаты поиска

Содержание CS-4920

Отзывы:

Echo CS-4920, Руководство оператора, Страница: 4 / 64

Результаты поиска

Содержание CS-4920

Отзывы: