CS-361P
OPERATION
X7503323307
37
© 03/22 ECHO Incorporated
• Apply a light coating of engine or bar and chain oil to metal parts after
they are cleaned.
• Install and properly tension guide bar and chain. Run engine for one
minute alternating engine speed between full throttle for five seconds and
idle for five seconds to coat metal parts with additional protective chain
oil.
◆
Do not run a chainsaw not under cutting load at wide open
throttle longer than five seconds or engine damage can
occur.
◆
Keep chain properly tensioned during operation to prevent
the chain from jumping out of the guide bar rail slot and
damaging metal engine parts.
Felling the Tree
A falling tree can seriously damage anything it may hit - a car, a
house, a fence, a power line, or another tree. There are ways to
make a tree fall where you want it, so first decide where that is!
Before cutting, clear the area
around the tree. You will need good
footing while working and you
should be able to work the saw
without hitting any obstacles. Next,
select a path of retreat. When the
tree begins to fall you should retreat
away from the direction of fall at a
45-degree angle and at least 3 m
(10 feet) from the trunk to avoid the
trunk kicking back over the stump.
Retreat
Retreat
Direction
45°
45°
3 m (10 ft.)
Not this way
of fall
Содержание CS-361P
Страница 57: ...CS 361P NOTES X7503323307 57 03 22 ECHO Incorporated NOTES ...
Страница 59: ...CS 361P PRODUCT REGISTRATION X7503323307 59 03 22 ECHO Incorporated ECHO Incorporated ...
Страница 60: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www echo usa com C67315001001 C67315999999 ...