![background image](http://html.mh-extra.com/html/echo/cs-303t/cs-303t_operators-manual_531816034.webp)
OPERATION
CS-303T
34
X7503209108
© 10/20 ECHO Incorporated
7.
Press Throttle Trigger Lockout
(D) down while grasping
Throttle Trigger (E) and then
push in Throttle Latch (F) as
shown.
8.
Securely hold the chain saw as
shown. When starting the chain
saw place the unit on flat
ground and hold the front
handle with left hand and hold
firmly the rear end of rear
handle with right knee. Pull
starter handle with right hand
several times until first firing
sound.
9.
Push Choke Control Knob (C)
all the way in to (OPEN
choke position).
10. Pull starter handle to start the
engine.
Note: Do not pull starter rope out
to maximum position. Do
not allow recoil handle to
snap back against the
casing. If engine does not
start after 5 pulls, repeat
instructions.
D
E
F
C