Echo CS-2511PN Скачать руководство пользователя

Страница: 13 / 64

CS-2511PN

SAFETY

X7503334500

Rules for Safe Operation

Kickback Safety Precautions for Chainsaw Users

KICKBACK may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinches the
saw chain in the cut.

Tip contact in some cases may

cause a lightning fast reverse

REACTION, kicking the guide bar

up and back towards the operator.

Pinching the saw chain along the

top of the guide bar may push the

guide bar rapidly back towards the

operator. Either of these reactions

may cause you to lose control of the

saw which could result in serious

personal injury.

Do not rely exclusively upon the safety devices built into your saw. As a

chainsaw user, you should take several steps to keep your cutting jobs free

from accident or injury.

With a basic understanding of

kickback, you can reduce or

eliminate the element of

surprise. Sudden surprise

contributes to accidents.

Keep a good firm grip on the

saw with both hands, the right

hand on the rear handle, and

the left hand on the front

handle, when the engine is

running. Use a firm grip with

thumbs and fingers encircling the chainsaw handles. A firm grip will

help you reduce kickback and maintain control of the saw. Don’t let go.

Make sure that the area in

which you are cutting is free

from obstructions. Do not let

the nose of the guide bar

contact a log, branch, or any

other obstruction which could

be hit while you are operating

the saw.

Cut at high engine speeds.

Rotational kickback

Kickback Danger Zone

Linear kickback

Kickback

Pinch

Содержание CS-2511PN

































































Результаты поиска

Содержание CS-2511PN

Отзывы:

Похожие инструкции для CS-2511PN

Бренды по названию

Популярные бренды

Echo CS-2511PN, Руководство оператора

Результаты поиска

Содержание CS-2511PN

Отзывы:

Похожие инструкции для CS-2511PN

Бренды по названию

Популярные бренды