background image

Before You Begin

DEAR ECHO BEAR CAT CUSTOMER

Thank you for purchasing a ECHO Bear Cat product.  The ECHO Bear Cat line is designed, tested, and manufactured 

to give years of dependable performance.  To keep your machine operating at peak efficiency, it is necessary to adjust 

it correctly and make regular inspections.  The following pages will assist you in the operation and maintenance of your 

machine.  Please read and understand this manual before operating your machine.
If you have any questions or comments about this manual, please call us toll-free at 1.888.625.4520.
If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer.
This document is based on information available at the time of its publication.  ECHO Bear Cat is continually making 

improvements and developing new equipment.  In doing so, we reserve the right to make changes or add improvements 

to our product without obligation for equipment previously sold.

PLEASE SEND US YOUR WARRANTY CARD

A warranty card is included in your owner's kit packaged with your machine.  Please take the time to fill in the information 

requested on the card.  When you send your completed card to us, we will register your machine and start your coverage 

under our limited warranty or go to bearcatproducts.com/warranty/warranty-registration/. 

HOW TO CONTACT ECHO BEAR CAT

ADDRESS

PHONE

E-MAIL

HOURS

237 NW 12th Street

P.O. Box 849

West Fargo, ND 58078

888.625.4520

701-282-5520

FAX: 701-282-9522

[email protected]

[email protected]

Monday - Friday, 

8 am to 5 pm

Central Time

SERIAL NUMBER

MANUFACTURED BY CRARY INDUSTRIES

MANUFACTURED IN U.S.A.

XXXXXX

WEST FARGO, NORTH DAKOTA 58078 U.S.A.

SERIAL NUMBER

© 2013, CRARY INDUSTRIES, ALL RIGHTS RESERVED. PRODUCED AND PRINTED IN THE U.S.A.

SERIAL NUMBER LOCATION

Please record the serial number in the space provided and 

on the warranty and registration card.

ORDERING PARTS

Only genuine ECHO Bear Cat replacement parts should 

be used to repair the machine.  Replacement parts 

manufactured by others could present safety hazards, 

even though they may fit on this machine.  Replacement 

parts are available from your ECHO Bear Cat dealer.

Provide the following when ordering parts:

The SERIAL NUMBER of your machine.
The PART NUMBER of the part.
The PART DESCRIPTION.
The QUANTITY needed.

FOR MACHINE SERVICE OR PARTS:

For service assistance, contact your nearest authorized 

ECHO Bear Cat dealer or the factory.  For parts, contact 

your authorized dealer. Your dealer will need to know the 

serial number of your machine to provide the most efficient 

service.  See below for information on how to identify and 

record the serial number for your machine.

FOR ENGINE SERVICE OR PARTS:

For engine service or parts, contact your nearest authorized 

engine dealer.  ECHO Bear Cat does not handle any parts, 

repairs or warranties for engines.

*Original Instructions

Содержание BEAR CAT SC2170






















Отзывы: