background image

10

  

 WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop 

before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear 

gloves to protect hands from sharp edges and hot surfaces.

Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help 

your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your 

unit to an ECHO Service Dealer for maintenance.  To help you decide whether you want to DO-IT-YOURSELF or have 

the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO dealer for repairs.

skIll

 

levels

 

Level

 

1

 =  Easy to do. Common tools may be required.

 

Level

 

2

 =  Moderate difficulty. Some specialized tools may be required.

m

aInTenanCe

maInTenanCe

 

InTervals

Component

Maintenance Procedure

Skill Level

Interval

Drive Shaft

Grease

1

Every 25 hours of use 

[1]

Screws/Nuts/Bolts Inspect/Tighten/Replace

1

Before Each Use

IMPORTANT

 - Time intervals shown are maximum. Actual use and your experience will deter-

mine the frequency of required maintenance.

[1] Apply POWER BLENDX

TM

 Grease.

NOTE

Refer to the Grass Trimmer / Brush Cutter Safety Manual for proper and safe trimming techniques.

IMPORTANT

Never wear line shorter than 1-1/2 inch extension from head, otherwise overspeeding and engine damage may result.

o

peraTIon

  

 WARNING

Moving parts can amputate fingers or cause severe injuries.  Keep hands, clothing and loose objects away from all 

openings.  Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop 

before removing obstructions, clearing debris, or servicing unit.

Содержание 99944200615

















Отзывы: