4
OPERATING INSTRUCTIONS
1. For best results, angle pipes approximately 10 degrees
from the side of the rain gutter. The adjustable nozzle
should be angled 30 to 45 degrees in the direction you will
be cleaning. See Fig. 6.
2. Start the unit and slide the nozzle along the lip of the
gutter, (See Fig. 7) lifting the outlet nozzle up and over
the gutter support brackets. Keep the long pipes angled
slightly ahead of you in the direction you are cleaning. See
Fig. 8.
NOTE
When the power blower is started, the air exiting from the
nozzle will cause the long extension to sway slightly. Hold
the unit firmly for effective cleaning.
Individual conditions will vary when using this attachment.
Some practice and experimentation will be necessary to find
the best and most effective position for the type of house and
gutter design.
Fig. 6
Fig. 7
Fig. 8
SAFETY INSTRUCTIONS
WARNING
The operation of any power tool can result in foreign objects being thrown into the eyes, which can result
in severe eye damage. Always wear safety goggles before commencing power tool operation. (These
goggles meet ANSI Standard Z-87.1.)
•
DO NOT
operate blower and attachments when fatigued.
•
DO NOT
overreach or stand on unstable support, keep good footing and balance at all times.
• Never direct airflow towards bystanders. Always be aware of direction the debris will be thrown.
• Wear ear protection whenever possible.
• Always use a face filter mask to avoid breathing dust.
•
DO NOT
block gutter nozzle in order to avoid engine damage due to over speed.
• Follow all safety instructions as outline in you power blowers Operator’s Manual.
