![background image](http://html1.mh-extra.com/html/echo/1e-pb-24ln/1e-pb-24ln_operators-manual_3899530014.webp)
14
STARTING
WARM
ENGINE
1.
Stop Switch
- Start/Run. Move stop switch button (A) away from
the STOP position.
2. Lay the blower on a flat clear area. Firmly grasp throttle grip with
left hand and rapidly pull recoil starter handle/rope (D) until engine
fires.
IMPORTANT
Recoil starter: Use short pulls - only 1/2-2/3 of rope for starting.
Do not allow the rope to snap back in. Always hold the unit firmly.
NOTE
If engine does not start after 4 pulls, use Cold Start Procedure.
STOPPING
ENGINE
1. Release throttle trigger (E) and allow engine to idle for a minute.
2. Move stop switch (A) to "STOP" position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
Содержание 1E PB-24LN
Страница 23: ...23 POWER BLOWER OPERATOR S MANUAL NOTES...