background image

6

SAFE

 

OPERATION

WARNING   

   DANGER

Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.

Review area to be cleared. Look for potential hazards such as stones
or metal objects.

Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than 15 m (50 ft.) while the
blower is in use.

Take wind conditions into account: avoid open doors and windows.

Provide all operators of this equipment with the Operator's Manual
and instructions for safe operation.

Do not point blower at people or animals.

Keep A Firm Grip

Hold handles with fingers together encircling handles.

Keep A Solid Stance

Maintain footing and balance at all times.  Do not stand on slippery,
uneven or unstable surfaces.  Do not work in odd positions or on
ladders.

Do not perform Maintenance or Assembly procedures with engine
running.

Noise Control

Follow local noise regulations on sound
levels and hours of operations. Use only
during appropriate hours.

Never use a higher speed setting then
necessary to perform a task. The higher
the engine speed the louder the blower
noise.

Be a good neighbor.

Avoid Hot Surfaces

During operation, the muffler or catalytic
muffler and surrounding cover may
become extremely hot. Avoid contact
during and immediately after operation.
Always keep exhaust area clear of
flammable debris. Allow the engine and
muffler to completely cool before
performing any maintenance activity.

PRODUCT  EMISSION  DURABILITY

The 300 hour emission durability period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed
as listed in the Maintenance Section of this manual.

An Emission Control Label is located on the engine.  (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).

E

MISSION

 C

ONTROL

California Tier 2

The emission control system for these engines are EM/WTC (Engine Modification and Catalyst).

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY:  3EHXS.0254EB   DISPLACEMENT:   22.8 

CC

EMISSION COMPLIANCE PERIOD : 300 HRS.

THIS ENGINE MEETS U.S. EPA PHASE II AND 2000 AND

LATER CALIFORNIA EMISSION REGULATIONS FOR

S.O.R.E.  REFER TO OWNER'S MANUAL FOR MAINTE-

NANCE SPECIFICATIONS AND ADJUSTMENTS.

Содержание 06001247


























Отзывы: