background image

6

SAFE

 

OPERATION

WARNING  

  DANGER

Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.

Provide Safety And Operating Instructions To All Operators
• Provide all users of this equipment with the Operator's Manual and

Safety Manual for instructions on Safe Operation.

Keep a Solid Stance
• Maintain footing and balance at all times. Do not stand on slippery,

uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not over reach.

Keep a Firm Grip
• Hold the front and rear handles with both hands, with thumbs and

fingers tightly encircling the handles.

E

MISSION

 C

ONTROL

EPA 2

The emission control system for this engine is EM (Engine Modification).

Emission Control Label   (located on Engine)  (EXAMPLE ONLY, information on label varies by FAMILY).

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY:     3EHXS.0214ED  DISPLACEMENT:    21.2 

CC

EMISSION COMPLIANCE PERIOD : 300 HRS.

THIS ENGINE MEETS U.S. EPA PH 2 AND 2000 AND LATER

CALIFORNIA EMISSION REGULATIONS FOR S.O.R.E.  REFER

TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICA-

TIONS AND ADJUSTMENTS.

PRODUCT  EMISSION  DURABILITY

The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.

Содержание 05999999





























Отзывы: