RP-1200 Quick Start Guide
P/N YB-071-00016-0A
REVISED 11/05/2019
©2019 Yamabiko Europe S.A/N.V
All Rights Reserved
EN
ENGLISH
Power Switch
The power switch is under the cover on the back right-
hand side of the robot.
ON
OFF
Move the power switch to the OFF position for extended
idle time or winter storage.
The Smartbox
Lift the STOP button up to access the Smartbox.
Use the Smartbox to configure the robot.
Starting
To start the robot, press and hold
for five
seconds, then release it. The start-up procedure takes
approximately two minutes.
If the robot does not start, return it to the charging
station and completely charge the battery.
Stopping
Press the STOP button to stop the robot.
ON
OFF
RP-1200
3
1
2
6
8
0
4
5
7
9
X
5
SEC
2
MIN
PUSH
WAIT
