Echelon PCLTA-20, Руководство пользователя, Страница: 16 / 39

PCLTA-20 PCI Interface User’s Guide 2-5
6. When prompted for a destination directory, enter the desired installation directory.
By default this directory is
c:\lonworks
, unless previous L
ON
W
ORKS
products
have been installed and registered a different path in the Windows Registry. The
path may be modified using the Browse button; however, if a directory other than
c:\lonworks
is chosen, the PCLTA-20 images path will have to be specified to
enable use of the PCLTA-20 card. This is accomplished during PCLTA-20
Configuration. See Chapter 3,
Configuring and Testing the PCLTA-20 Adapter
.
7. There is a limit of six (6) PCLTA-20 cards in a single PC.
8. The installation software for the Windows NT and Windows 2000 versions will issue
a prompt to add a DOS virtual-mode device driver file to the DOS
CONFIG.NT
file to
support DOS applications calling
LON1
. This will allow DOS applications to be used
in a Windows NT or 2000 DOS shell/window. For more information see Virtual-
Mode DOS Driver later in this chapter. The following line is added to the
CONFIG.NT
file:
DEVICE=%SYSTEMROOT%\SYSTEM32\PCLTDOS.SYS /D1
The argument /D1 names this DOS device as LON1.
9. Software installation is complete. At the prompt to restart the computer, remove
the PCLTA-20 installation diskette, turn off power, install the PCLTA-20 card, and
then reboot the computer.
Windows 95/98/Me Software Removal Procedure
To remove the PCLTA-20 software, follow these steps:
1. Choose the Add/Remove Programs icon from the Windows Control Panel.
2. Select “LonWorks
®
PCLTA-10/20/PCC-10 for Windows® 95/98/Me” from the list
under the Install/Uninstall tab.
3. Click the Add/Remove button.
4. Confirm file deletion at the prompt. Most of the PCLTA-20 software will be removed
automatically.
5. If necessary, edit the
CONFIG.SYS
file to remove any references to the stub driver.
Windows NT 4 and Windows 2000 Software Removal Procedure
To remove the PCLTA-20 software under Windows NT 4.0 or Windows 2000, follow
these steps:
1. Choose the Add/Remove programs icon from the Windows Control Panel.
2. Select “LonWorks
®
PCLTA-10/20/PCC-10 for Windows® NT or Windows 2000” from
the list under the Install/Uninstall tab.
3. Click the Add/Remove button.
4. Confirm the deletion at the prompt. Most of the PCLTA-20 software will be
removed automatically.