47
EN
Symptom
Cause
Correction
The remote
controller does not
work
•
There are no batteries in the
remote controller.
•
The batteries are dead.
•
The remote controller is not
directed at the remote controller
sensor.
•
The remote controller is outside of
its operating range.
•
The device is turned off .
•
Insert two AAA/1.5 V batteries.
•
Replace the batteries with a new
set.
•
Make sure the remote controller
is directed at the remote
controller sensor.
•
Make sure the remote controller
is close enough to the device.
•
Turn the device off and unplug
from the socket. Turn the device
back on.
TECHNICAL SPECIFICATIONS
Power
AC ~100–240 V, 50/60 Hz
Power input
20 W
Standby power input
<1 W
Operating conditions
Temperature
-10 °C ~ +35 °C
Relative humidity
5 % ~ 90 %
CD
Frequency characteristic
20 Hz ~ 20 kHz
S/N ratio (fi lter A)
>80 dB (1 kHz)
Dynamic range
70 dB (1 kHz)
Distortion and noise
-60 dB (1 kHz)
Fluctuation
Under measurable level
Tuner
FM band range
87,5 ~ 108 MHz
Power output (max.)
2.5 W × 2
Frequency characteristic
±1.5 dB (20 Hz ~ 20 kHz)
