receiver, with proper orientation as indicated on the battery
compartment.
If the receiver is left unused for an extended period of time, please
disconnect it from the power adapter or remove batteries if they
have been installed.
Channel Synchronization
(*for adding additional cameras only):
Press and hold the Channel button on the receiver until the Learn-
ing indicator flashes, and then press the Learning button on the
back of the camera while the indicator flashes (about 8 seconds)
on the receiver, at which point the channel number displayed on
the receiver should match the channel selected on the back of
the camera. You may now control this additional camera with the
direction pad on the receiver.
You may adjust the brightness and the volume to your desired
level by rotating the dials on the side of the receiver.
Brightness Control
Volume Control
- 4 -
