English
English
7
USING THE APPLIANCE
Note:
When first switched on or switched on after a long period of inactivity, the heaters may emit odor or
smoke. This is normal and it will fade away in a short while.
This convector uses convection heating technology with temperature control. It is also equipped with the
function
TURBO
(use of heating together with a fan) Thermostat control (A) is used to regulate temperature.
Turn the power control to set the required level: You can use the function TURBO to heat the room faster.
With the power control (B) you can set:
2 power levels:
I
= 1250 W
II
= 2000 W
2 power levels using the fan (TURBO):
= 1250 W
= 2000 W
Any manipulation of the device can only be performed if it is switched off with the main switch and
disconnected from the electrical outlet.
Turning off the convector
First, set the thermostat control to position „MIN" and switch to position "0". Then always unplug the power
cord from the outlet!
Any handling of the device can only be performed if the switches are off and it is disconnected from the
electrical outlet.
Protection against overheating
The internal thermal fuse protects the heater from overheating and automatically shuts it off. In this case, the
operating indicator turns off.
If the device shuts itself off, disconnect it from the electrical outlet. The device is ready to use again after it cools
(in about 15 minutes}. Plug the power cable back into the socket.
If the situation repeats, first check that the thermostat controller is set correctly and that the ventilation holes
are not covered.
CLEANING AND MAINTENANCE
Always pull the power cord out of the outlet before cleaning and wait for it to cool down completely. Clean the
outer surface of the convector with a damp cloth. Do not use sharp objects or abrasive cleaners to clean the
surface of the convector, you could damage it.
You can put the convector in storage only after proper switching off the main switch, disconnection from the
outlet and after complete cooling.
STORAGE OF THE CONVECTOR
If you do not plan to use the device for a longer period of time, you should store it in a clean and dry place
protected from dust.
TECHNICAL DATA
Max. input power 2000 W
2 power levels: 1250 W a 2000 W