GB
GB
29
near the heat convector (0.9 m) can be hotter than usual. Place the
convector to ensure sufficient air circulation.
9. Do not place the convector on a high pile carpet.
10. Do not place the convector in front of or directly under an electric
socket.
11. Do not cover the heat convector! Risk of overheating or catching
fire if covered.
12. The convector must not be plugged into the socket through a timer
switch or connected to a remotely switched supply circuit; risk of
fire in case of a remotely activated covered or insufficiently placed
convector.
13. Do not use the convector in the direct vicinity of the bath, shower
or pool and do not use in places from which it may fall into the bath
or other water containers!
14. If an unusual smell or smoke begins to come from the device,
disconnect the device and have it checked by a service centre.
15. Do not switch off the device by pulling on the power cord. Always
turn off the main switch of the convector first!
16. Always unplug the convector when moving it to another location.
17. Do not leave a convector with inserted power cord unsupervised.
Disconnect the cord from the electrical outlet prior to any
maintenance. Do not unplug the device by pulling the power cord.
Unplug the power cord from the outlet by grasping the plug.
18. Do not allow the power cord to touch hot surfaces or run the cord
over sharp edges.
19. Do not use the convector in places where inflammable materials
are stored (paint, gasoline, solvent etc.) or where there is a risk of
inflammable fumes appearing.
20. Do not put your fingers or other objects into the openings of the
heat convector.
21. Use the convector only in accordance with the instructions given in
this manual. The manufacturer is not liable for damages caused by
the improper use.
