GB
27
Stopping the alarm and turning it back on for the next day
When the alarm 1 or 2 sounds, its particular symbol
1
or
2
fl ashes. Press once
AL 1.2
(
A
8
) to stop the alarm
and to activate it for the next day. Symbol
1
or
2
stops fl ashing and stays permanently displayed.
Note:
When the alarm sounds you can press /
NAP
(
A
6
) or
RADIO/SLEEP
(
A
4
) to activate the nap timer
or start the radio and turn off the alarm for the day.
Delayed alarm function – SNOOZE (the default interval is 5 minutes)
When the alarm sounds, you can press once
(
A
5
) to mute the alarm and it sounds again after the
set snooze interval.
Note:
If the second alarm sounds when (or is delayed) the fi rst alarm sounds, the fi rst alarm is suppressed by
the second alarm – the fi rst alarm is reset for the next day.
Display brightness setup
By pressing the button
(
A
5
) you can set the brightness of the LED display. This can be done only
when the radio does not play and when the alarm does not sound.
Using the nap timer
The nap timer (NAP) allows you to briefl y relax and let it automatically wake you up in 5, 15, 30, 45, 60, 75 or
90 minutes.
1. Press
once /
NAP
(
A
6
), the display shows the nap icon and the default nap time “
05
” (5 minutes).
2. Press
repeatedly /
NAP
to select the desired nap time. If you do not press any button for 5 seconds, the
alarm clock exits the setting mode.
3. During the timer countdown the nap symbol is shown on the display. When the timer countdown reaches
0 time the alarm sounds and the nap symbol fl ashes. Press once /
NAP
to stop the alarm, the nap symbol
fades.
Note:
If the nap timer is set to the time when the alarm should sound, the nap time will be automatically
cancelled by the alarm.
FM antenna setting
Extend the telescopic antenna fully and change its orientation to ensure optimum FM reception. Do not
disassemble, modify, and connect the antenna to other antennas.
Listening to FM radio
1. Turn on the radio, press once
SLEEP/RADIO
(
A
4
): the display shows “
ON
” and radio frequency in MHz.
2. Using
arrows / tune in the required radio station. Press and hold / to search the nearest station
with clear reception.
3. If you want to set volume, press once
VOL
(
A
3
), the display shows “
L07
”. Using / adjust volume in
range from
L01
(minimum) to
L15
(maximum)
4. Press
(
A
5
) to turn off the radio.
Note:
Keep the radio away from fl uorescent lights and other electronic devices that could cause interference
with radio reception
Using preset memory
This radio alarm clock off ers a total of 10 memory presets for FM stations. You can save in memory your
favourite stations and then quickly tune them in.
1. Turn on the radio and tune to a station, which you want to store in memory
2. Press and hold
SET
(
A
7
). Flashing symbol “
01
” appear. Press shortly
SET
to store the frequency in the
memory position 1.
3. Using / tune another station, which you want to store in memory. Press and hold
SET
. Flashing symbol
“
01
” appears. Using / select memory position “
02
” and press shortly
SET
to store the tuned frequency
in the memory position 2.
4. You can store in the memory more stations by repeating steps 2 and 3.
