EN
42
43
INSTALLING THE MICROWAVE OVEN
Parts and features
Unpack the oven and all accessories.
The oven comes with the following accessories:
Glass turntable
1
Assembled support
1
Operating manual
1
1
2
3
5
7
6
4
4
1
7
9
8
3
0
6
2
5
1 Safety lock system
(Switches off power if the door is opened while
cooking)
2 Oven door view window
3 Assembled support
4 Open door button
5 Control panel
6 Waveguide
7 Glass turntable
1
Power level
2
Clock
3
Weight Adjust
4
Multi Stage Cooking
5
Speed Defrost
6
Auto Defrost
7
Preset
8
Pause/Cancel
9
Menu/Time
10
Start/Quick Start
INSTALLATION
Remove all packaging material and take out all accessories.
Make sure the oven is not damaged in any way (dented or damaged door etc.). Do not install the microwave oven if damaged.
Kitchen counter
Oven body:
Remove all protective foil from the oven surface.
Do not remove the light brown foil, screwed to the inside of the
oven. This foil protects the oven magnetron.
Installation
1.
Place the oven on a flat surface with a sufficient amount of space
around the appliance to ensure the proper function of exhaust
vents.
The minimum distance between the oven and the closest wall
must be 7.5 cm.
At least one side must be open space.
a) Leave at east 30 cm of free space above the oven.
b) Do not remove oven legs.
c) Do not block exhaust vents. Blocking the exhaust vents could cause damage.
d) Place the oven as far away from the radio or television as possible.
The microwave oven can interfere with the television and radio signal.
2.
Connect the oven to a standard electricity network. Make sure the voltage and frequency on the oven label corresponds with the
network voltage and frequency.
Opening
30 cm
7.5 cm
7.5 cm
AUTOMATIC COOKING MENU
1
Milk/Coffee
2
Rice
3
Spaghetti
4
Potatoes
5
Auto Reheat
6
Fish
7
Pizza
8
Popcorn