EN
43
External temperature sensor
w;
wa
ws
wd
wf
wg
1.
Alarm clock on indicator
2.
Clock
3.
Radio transmission indicator
4.
Room temperature
5.
External temperature
6.
Weather forecast
7.
Dimming display/snooze
8.
Up/RF
9.
Setup button
10. Alarm clock button
11. Down/WAVE
12. Reset
13. AC/DC adapter
14. Power adapter jack
15. Opening for the stand
16. Slot for hanging
17. Battery compartment
18. Insert 1 CR2032 battery
19. Insert AC/DC adapter connector
20. LED control
21. Stand
22. Channel switch 1/2/3*
23. Insert 2 batteries (AAA)
24. If the sensor should stand on an underpad,
mount the stand from the bottom.
25. In the case of wall mounting, snap the sensor
into the stand, which is screwed to the wall from
the back.
* Model MS 007 works on channel 1
CONDITIONS AFFECTING WIRELESS TRANSMISSION
This device contains accurate clock controlled by a radio signal. Like in case of other wireless equipment,
reception capability is affected among others by following conditions:
•
Distance from signal source
•
Terrain unevenness
•
High buildings in vicinity
•
By railway lines, high voltage lines, etc.
•
Highways, airports vicinity, etc.
•
Large building sites in vicinity
•
Ferro-concrete constructions
•
By close electrical appliances
•
By close computers and TV sets
•
Inside means of transport
•
Metal constructions and objects
Install the device to a place with optimal transmission conditions, close to windows, out of electronic devices
and metal objects.
Содержание MS 007
Страница 2: ......
