
GB
40
Maintenance
Attention:
Turn off the appliance and disconnect it from power before cleaning and maintenance to prevent
injury by electric shock!
Cleaning the external surface
1. Unplug the power supply from the outlet.
2. Wipe it with a fine cloth. Do not use benzine, solvent or other chemicals for cleaning. These substances
could damage the surface of the device and deform plastic components.
3. Protect the appliance from water getting in.
Cleaning the filter
We recommend to clean the filter every 14 days. If the air is polluted it is necessary to clean it more often. When
the filter is gradually clogged with dust, the efficiency of air conditioning is reduced. When cleaning, do the
following:
1. Remove the input grill and then filter, see picture.
2. Place the filter in a solution of neutral detergent or hot water (40° C) and let it dry in the shade after
washing it.
3. Replace the clean filter back. Turn on the air conditioner and operate it as usual.
Notes:
•
To clean the filter do not use overly hot water (ideal temperature is about 40° C) and aggressive cleaning
agents (alcohol, gasoline, paint thinners).
•
To avoid deformation of the filter protect it from heat and let it dry by itself.
•
Do not operate the appliance without inserted filter.
Seasonal maintenance
If you are not using the appliance for longer time do the following seasonal maintenance:
1. Remove the drain plug and drain the water from the appliance.
2. Let the appliance run for 2 hours in the airflow mode until the inside is all dried up.
3. Turn off the appliance and unplug it.
4. Clean the filter and replace it.
5. Remove the exhaust hose assembly and store it carefully.
6. Remove the batteries from the remote control.
7. Put the appliance in a plastic bag and store it in a cool and dry place.
Do the following after long term storage of the appliance before using it again:
1. Make sure that the filter and the drain plug are in place.
2. Check the power cord for any damage. When it is damaged, do not use the appliance.
3. Insert batteries in the remote control.
4. Reinstall all accessories in accordance with installation instructions.
If the filter is not too dirty, you can remove the
dust with a vacuum cleaner.
Wash heavily soiled filter with warm water.
Содержание MK 104
Страница 2: ...3 4 5 1 2 6 9 0 8 7 qa qs A B C ...
Страница 33: ...DE 33 ...
Страница 43: ...GB 43 ...
Страница 83: ...LV 83 ...