English
English
8
2B – Wooden crossbar assembly
Use the wall board as a template. Make sure that it is level, mark four mounting holes into the wooden post.
Drill four holes 5 mm in diameter and 60 mm deep. Apply the wall board horizontally and fixate to the wall
using four long bolts (B1) and washers (B3). Tighten the bolts firmly, but not too much.
Wooden post
Level (included)
Warning:
Use self-tapping screws to keep the wall plate perfectly aligned with the wall. Ensure that the self-
tapping screws are fully inserted into the dowel without any gap. This ensures a stable mounting of
the bracket and prevents damage to property or injury.
