30
EN
1
2
3
4
Buttons
1. Setting the clock and timer
2. Down/Unit
conversion
3. Up/setting to zero or tare
4. Switch
OPERATING INSTRUCTIONS
Inserting or replacing batteries
The device is powered by two AAA batteries (not included). Remove the foil wrapping
before use.
1. Remove empty batteries from the device.
2. Insert new batteries. Observe polarity as marked.
Switching on and setting the time
1. The device will automatically go to time setting mode after the batteries
are inserted. When the hour is fl ashing, set the hour using
. When
setting, remember the AM/PM indicator (morning/afternoon).
2. Confi rm by pressing
T-SET
and continue to set the minutes. When the
minute is fl ashing, set minutes using
.
3. Press
T-SET
to fi nish setting of the clock.
Note:
• Press
ON/OFF
to cancel the set time.
• After 60 seconds of inactivity, the display returns to current time.
Weighing mode
1. Place the scale on a fi rm, level surface.
2. If you will weigh ingredients in a bowl, place the bowl on the scale before
switching the scale on.
3. Press
ON/OFF
to enter the weighing mode.
4. Wait until the LCD display shows all informations.
5. Place the weighed object on the scale. The LCD display will show the weight.
Unit conversion
While weighing, you can press
UNIT
to switch between weight display in metric units (g, ml) or in imperial
units (oz, fl ).
1. To switch between the metric and imperial systems, press the
UNIT
button longer (3 seconds).
Long push
UNIT
2. When pressing the button
UNIT
for shorter time, you will switch between weight and volume (water or
milk).
Metric system:
Short push
UNIT
Short push
UNIT
Short push
UNIT
