English
English
19
Filters for water supply
Filters on the water supply prevent dirt and foreign
materials from entering the washing machine.
We recommend cleaning these filters as soon as not
enough water flows into the washing machine, allthough
the water supply is switched on and the tap is open. We
recommend cleaning these filters every 2 months.
•
Unscrew the supply hose (s) from the washing
machine.
•
To remove the water supply filter from the filling
valve, use long pliers and carefully remove the
plastic rod on the filter.
•
The second water supply filter is located at the end of
the supply hose that goes into the tap. To remove the
second water supply filter, use long pliers and carefully remove the plastic rod on the filter.
•
Thoroughly clean the filter with a soft brush, wash with soapy water and rinse thoroughly. Gently push the
filter back into place.
ATTENTION:
The filters on the water supply valve may be clogged due to poor water quality or insufficient
maintenance and may be damaged. This could cause a water leak. Such malfunctions are not
covered by the warranty.
Pump filter
The pump filtration system in your washing machine
extends the life of the pump by preventing dirt from
entering the washing machine. We recommend to
clean the pump filter every 2 months.
The pump filter is located behind the cover in the lower
right front corner.
Pump filter cleaning:
1. Open the cover. You can use the liquid detergent
partition, see picture.
2. Insert the end of detergent measuring scoop or
liquid detergent dipstick into the opening of the
cover and gently push it backward. The cover
opens.
3. Before opening, place a container under the filter
cover that catches any water left in the washing
machine.
4. Release the filter by turning it counterclockwise
and pulling to remove it. Wait until the water
drains.
NOTE:
Depending on the amount of water inside the
washing machine, it may be necessary to empty
the water collection container several times.
5. Use a soft brush to remove all foreign materials from the filter.
6. After cleaning, replace the filter and turn it clockwise to secure it.
7. When closing the filter cover, make sure that the brackets inside the cover fit into the holes on the front
panel side.
8. Close the filter cover.
WARNING:
The water in the pump may be hot, wait for it to cool before cleaning or maintenance.
1
3
5
2
4
6
