GB
42
Electronic display
High temperature warning
Super freeze function indicator
Degree Celsius indicator
Fahrenheit degree indicator
Numeric temperature display
Button to turn on/off the Super
Freeze function and button lock
Button for temperature setting
•
Normally, the display shows the set temperature or active mode. If a fault has occurred, an error code will
appear on the display.
•
By default, the numeric temperature display goes off 30 seconds after the appliance is switched on. If
you want the temperature/mode setting to light up permanently, press and hold the
TEMP
and
SUPER
buttons at the same time. The display will show ON or OFF depending on whether or not the display
automatic turn-off after 30 seconds is enabled.
Keylock
To switch the button lock on or off, press and hold the
SUPER
button for at least 3 seconds. The activation of
the button lock will be indicated by display flashing.
Switching temperature units
Press and hold the
TEMP
button to toggle between the Celsius (°C) and Fahrenheit (°F) scales. The current
setting will be indicated by the corresponding indicator at the top of the display lighting up.
Temperature settings
•
Press the
TEMP
button to display the current freezer temperature. You can then change the setting in 1 °C
increments over the following range with each subsequent press:
10 °C
9 °C
8 °C
... 1 °C
0 °C
-1 °C ... -28 °C
-29 °C
-30 °C
•
When using the Fahrenheit scale:
50 °F
49 °F
48 °F
... 33 °F
32 °F
31 °F ... -20 °F
-21 °F
-22 °F
Super freeze function
To activate the Super Freeze function, briefly press the
SUPER
button. When switched on, the corresponding
indicator lights up and the display shows -30 °C / -22 °F.
The Super Freeze function will switch off in the following cases:
