English
English
15
Cancelling program
If you want to cancel the program currently running, proceed as follows:
Hold the button Start/Pause for
3 seconds.
The process of cancelling the
program starts and after 30
seconds the water drains from
the dishwasher.
When the indicator End lights
up, the program is cancelled.
Turning off the dishwasher
When the indicator End is lit, switch off
the dishwasher by turning the selector
to the Off position.
Turn off the water supply and
disconnect the dishwasher from the
power supply.
NOTES
•
After completion of the wash program you can slightly open the door of the dishwasher to speed up the
drying process.
•
Open the door carefully, the steam coming from the open door is hot!
•
When you open the door or there is a power failure while the washing program is running, the dishwasher
will continue in the program when you close the door or when power is restored.
•
It is dangerous to open the door during operation, there is a risk of scalding by the hot water.
•
If you open the door or the there is a power failure in the drying stage, the program ends. The dishwasher
is ready for a selection of a new program.
Removing the dishes from the dishwasher
•
Before removing the dishes from the dishwasher, wait a few minutes before handling the dishes while they
are still hot and there is a greater risk of breakage. Also, the dishes dry better.
•
Unload first the bottom basket and then the upper one. Thus you will avoid water dripping from the upper
into the bottom basket.