ECG CDR 500 U, Инструкция по эксплуатации

Страница: 40 / 44

GB
40
Listening to the radio
Tuning FM radio stations
Automatic tuning of stations
1. Press repeatedly FUNC to select FM.
2. Press SCAN tu start the automatic function of tuning and saving of stations, or:
3. Press and hold . /
TUNE-
or > /
TUNE+
for 3 seconds to search automatically for a station with the
strongest signal.
4. Repeat the previous step to tune next stations.
Tuning stations with a weak signal
Repeatedly press briefly . / > to find frequency with best reception.
Saving stations as presets
1. Tune a radio station in the FM mode.
2. Press
PROG.CL
to activate the programming mode.
P01
appears and
PROG
starts flashing.
3. Press repeatedly . /
TUNE-
or > /
TUNE+
to select the required number of the preset.
4. Confirm by pressing
PROG.CL
.
5. Repeat steps 2 and 4 to save next presets.
6. If you want to remove the preset station, save another station in its place.
Tuning in the preset stations
Press repeatedly the button
PRESET
in the FM mode for tuning the required preset.
Selection of stereo/mono reception
The default setting of the radio is stereo reception. In case that there is a weak signal, you can improve the
quality of listening by switching to mono reception.
In the FM mode press the button
MO.ST
to switch between the mono and stereo reception.
FM Antenna
Extend fully the telescopic FM antenna for best reception of the FM radio and turn it in the position for best
reception.
Listening to USB
(Only for models with USB)
1. Press repeatedly the button
FUNC
to select the USB mode.
2. The display shows USB indicator and the device switches to playback from USB.
Connecting USB device
Carefully insert the USB memory device in the USB port on the right side of the device.
Browsing and listening of music files
When you connect the USB memory device, the device will find the saved MP3 files and starts their playback.
1. If that does not happen, start the playback by pressing
u
.
2. Press
u
to pause the playback, press it again to resume playback.
3. Using the buttons
.
/
>
skip to previous or following track.
4. If you want to skip 10 tracks forward, press the button
10
.
5. Press the button x to stop the playback.
Other functions
Press P.MODE to switch between normal playback, repeating one/all tracks and a random playback (RAND
indicator).
Disconnecting USB
Before you disconnect the USB memory, always turn off the device first or switch it into other mode than USB.