GB
GB
49
TROUBLESHOOTING
Troubleshooting
If the appliance is not operating properly, please check the following list of possible problems before contacting
a service centre.
Problem
Possible cause
Solution
No steam.
Check if the humidifier is plugged
in an outlet.
Plug the humidifier in the outlet.
Check if the humidifier is switched
on.
Use the knob to switch the humidifier on.
There is no water in the water
tank.
Fill the container with water.
Not enough water in the water
tank.
Add water to water tank.
Unusual smell of steam.
You have a new humidifier.
Remove the water tank and place it in
a cool, dry place for 12 hours.
Water is too dirty or the water
stayed in the water tank too long.
Clean the water tank. Replace the water
with clean water.
Unusual noise.
The water tank is positioned
incorrectly.
Place the water tank in correct position.
Not enough water in the water
tank.
Fill the container with water.
The unit does not stand on
a horizontal surface.
Place it on a level and horizontal surface
or on the floor.
The steam stream exits
from around the outlet
steam nozzle.
There is a gap between the water
tank and the bottom part of the
humidifier.
Reseat the water tank properly and turn
on the humidifier again.
If the humidifier still does not work or does not work properly after checking the above possible causes,
contact an authorized service center.
TECHNICAL SPECIFICATIONS
Nominal voltage: 100–240 V ~ 50/60 Hz
Nominal input power: 27 W
Noise level: 38 dB
Water container capacity: 5 l
Liquid consumption for humidification per 1 hour: ≥400 ml/hr.
Controller: battery CR2025, 3V DC (included)