56
GB
TELEVISION CONTROLS
Input switch
1. Press
SOURCE
to display menu of input sources.
2. Press
V/v
or
SOURCE
to select the required input.
3. Press
ENTER
to switch to the selected input.
4. Press
EXIT
to exit the menu.
Initial installation
Connect the antenna to the “RF-IN” input on the back panel of the TV set.
When you turn the TV on for the fi rst time, the initial installation menu appears.
OSD language
Using the
b/B
buttons, select the language in which you want the TV to communicate with
you via menu.
Mode setting
Using the
b/B
buttons, select mode
Country
Using the
b/B
buttons, select the required country.
Tuner Type
Using the
b/B
buttons, select antenna or cable
Auto search
Using the
b/B
buttons, select mode: DTV+ATV, DTV, ATV.
LCN
Using the
b/B
buttons, select On or Off
Auto tuning status
The TV set will fi rst tune in the digital channels. If you want to skip the digital channels, press MENU.
The tuning of the analogue channels will start. If you want to cancel the tuning of analogue channels, press
MENU.
Auto search
Search Ch26
Digital channels found:
DTV:18 Radio: 0 Data: 0
Analogue channels found: 0
Stop
End
Auto search
Search 145,25 MHz
Digital channels found:
DTV:19 Radio: 1 Data: 0
Analogue channels found: 3
Stop
End
YPbPr
HDMI1
HDMI2
HDMI3
SOURCE
SOURCE: Exit
First installation
OSD language
English
Mode setting
Home mode
Country CZ
Tuner Type
Antenna
Auto search
DTV+ATV
LCN Off
Start
Move Setup
Return
Exit
