© 1990-2021 - All Rights Reserved - ECdesigns
https://www.ecdesigns.nl
/
11 17
Firmware update
To update the PowerDAC-S firmware you need to download the
STM32CubeProgrammer
.
You need to ACCEPT Licence Agreement (click button) and on the next screen you need to fill-in your E-mail
address to be able to download STM32CubeProgrammer (you need to use confirm via email sent to you before
you can download the STM32CubeProgrammer).
The email sent to you contains the Download now button to start the download.
Goto link below to download the STM32Cube programmer (Win/Lin/Mac):
https://www.st.com/en/development-tools/stm32cubeprog.html#get-software
Download and install STM32CubeProgrammer.
Remove mains from PowerDAC-S.
Use tweezers to set the red jumpers on rear of PowerDAC-S
to PROGRAM configuration (see Jumper settings on previous page).
Download and unzip latest pdrs-firmware.zip
Now connect a USB cable from the PowerDAC-S to your computer and start the STM32CubeProgrammer.
