ECD V-M.O.L.E. Solar, Краткое руководство пользователя

Страница: 6 / 16

5
OPERATION - FRESH START
11) Enter the assembly information such as
part number, test product size, sensor
locations and a product image.
12) Click the Next command button.
13) Unwind the sensor leads and insert the
connectors into the M.O.L.E.® Thermal
Profiler. Make sure to connect them to the
same channel(s) that were configured in
the wizard workflow.
14) Locate the thermocouple sensors on a
test solar cell.
When locating a thermocouple sensor on
a test solar cell, make sure it is slightly
curved creating the proper tension
required to remain in place.