8-Port Gigabit Ethernet Unmanaged PoE Switch
- 7 -
2.1.3. Power on the Switch
The Switches connected an external power adapter power 53.5V/1.2A supply, make sure you use the
proper power supply.
AC Electrical Outlet:
It is recommended to use single-phase three-wire receptacle with neutral outlet or multifunctional
computer professional receptacle. Please make sure to connect the metal ground connector to the
grounding source on the outlet.
DC Power Adapter Connection:
Connect the DC power connector in the back panel of the Switch to external receptacle with the included
DC Power Adapter, and check the power indicator is ON or not. When it is ON, it indicates the power
connection is OK.
2.2.
Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please connect one end of
the twisted pair to RJ-45 jack of your computer, the other end will be connected to any RJ-45 port of the
Switch, the distance between Switch and computer is around 100 meters. Once the connection is OK
and the devices are power on normally, the LINK/ACT status indicator lights corresponding ports of the
Switch.
2.3.
Switch connection to the PD
1-8 ports of the Switch have PoE power supply function, PoE port power maximum support 30W, it can
make PD devices, such as internet phone, network camera, wireless access point work. You only need
to connect the Switch PoE port directly connected to the PD port by network cable.