die lust am hören
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools
e
ccola
page 6 of 9
Update April 2022
display in the middle. In case you wish to stop the drying process before,
you may set the switch on the right hand side on „0“. If necessary, you
may restart the drying process.
8.
Care and Cleaning of the ecco cleaner
It is recommendable to clean the filter of the vacuum pump every day
(but at least once a week). The same is located below the cover on the
left hand side of the equipment. For this purpose you will have to open
the cover and unscrew the transparent lid (with blue cap), screw off the
black cap above the filter and remove the filter for cleaning resp.
replacing. Replace the filter by a new one at least once a month (the
same can be supplied by us). The support of the filter is preferably
cleaned by means of a vacuum cleaner. Please make sure that the filter
is firmly attached and that the black and the transparent lid are properly
tightened. This can be checked by starting the equipment and closing
the red hose with your finger. The barometer should read between –0,7
and – 0,8 bar. Otherwise it is recommended to tighten the filter lid once
more.
Every now and then it can occur that the cleaning attachments are
soiled. In this case the barometer rises up to the scale limit and does not
move any longer. If so, you will have to put the cleaning attachments on
to the blue air hose for cleaning them. If this will not help we recommend
to dip the cleaning attachments into an ultrasonic bath for cleaning.
In the event of a faulty sucking function, it is recommended to check the
filter. It is supposed to be soiled.
