Troubleshooting:
The symptoms described below do not necessarily mean a failure within the display. Please check the following items before you initiate
request for repair.
Symptoms
Possible Causes/Solutions
No picture, no sound
Improper connection of automobile adapter. Use of un-authorized power supply. Power switch
is on OFF position.
No picture
Check whether AV cable is properly connected
No sound
Check whether audio wire is properly connected or the sound volume is turned off or set too
low.
Dark picture
Check whether brightness and contrast are adjusted correctly; Check whether the
environments temperature is too low.
No color
Adjust the color settings.
Upside down or lateral inverted picture Use the remote control horizontal /vertical selection switch to set proper orientation
No reversing function (i.e.Picture)
The black wire of the monitor AV cable to the reversing light may be loose. The red wire from
the monitor may be loose.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Declaration of conformity:
920-5203-00 Rev. B
Page 11 of 12
5. Set Up: SOURCE-CAM1, SOURCE-CAM2, SOURCE-CAM3, SOURCE-CAM4 options will display on the screen as illustrated below :
•
Press to select SOURCE-CAM1 to SOURCE-CAM4
Press - / + to select ON / OFF
E.g. Press to select SOURCE-CAM4 and press - / + to select OFF. CAM4
will be shut off. Press “S” to switch channels, CAM4 will not be displayed on the
screen.
SET UP
SOURCE-CAM1
ON
SOURCE-CAM2
ON
SOURCE-CAM3
ON
SOURCE-CAM4
ON
SET UP
SOURCE-CAM1
ON
SOURCE-CAM2
ON
SOURCE-CAM3
ON
SOURCE-CAM4
OFF
