Page 2 of 5
Installation and Mounting:
Wiring Instructions:
Figure 1
ED3801X
RED Wire:
Positive (need to add 2A fuse)
BLACK Wire:
Negative
BLUE Wire:
Pattern Select to Negative
YELLOW Wire:
Synchronized Function
(Up to 8 units can be Synchronized)
ED3802XX
RED Wire:
Positive, Colors 1 & 3 (need to add
2A fuse)
WHITE Wire:
Positive, Colors 2 & 4 (need to add
2A fuse)
BLACK Wire:
Negative
BLUE Wire:
Pattern Select to Negative
YELLOW Wire:
Synchronized Function
(Up to 8 units can be Synchronized)
IMPORTANT! This unit is a safety device and it must be connected
to its own separate, fused power point to assure its continued
operation should any other electrical accessory fail.
CAUTION!
When drilling into any vehicle surface, make sure that the
area is free from any electrical wires, fuel lines, vehicle
upholstery, etc. that could be damaged.
Note: It is recommended to isolate wires/blunt wires that were cut or not used.
ED3802XXX
RED Wire:
Positive, Group 1 (need to add 2A
fuse)
WHITE Wire:
Positive, Group 2 (need to add 2A
fuse)
RED & WHITE Wire:
Positive, Group 3 (need to add 2A
fuse)
BLACK Wire:
Negative
BLUE Wire:
Pattern Select to Negative
YELLOW Wire:
Synchronized Function
GREEN Wire:
Mode Select
(Up to 8 units can be Synchronized)
10in-lbs max. screw torque