Page 2 of 6
Notes:
1. Larger wires and tight connections will provide longer service life for components. For high current wires it is
recommended that terminal blocks or soldered connections be used with shrink tubing to protect the connections. Do
not use insulation displacement connectors (e.g., 3M Scotchlock type connectors)
2. Route wiring using grommets and sealant when passing through compartment walls. Minimize the number of splices
to reduce voltage drop. High ambient temperatures (e.g., under-hood) will significantly reduce the current carrying
capacity of wires, fuses, and circuit breakers. All wiring should conform to the minimum wire size and other
recommendations of the manufacturer and be protected from moving parts and hot surfaces. Looms, grommets,
cable ties, and similar installation hardware should be used to anchor and protect all wiring.
3. Fuses or circuit breakers should be located as close to the power takeoff points as possible and properly sized to
protect the wiring and devices.
4. Particular attention should be paid to the location and method of making electrical connections and splices to protect
these points from corrosion and loss of conductivity.
5. Ground termination should be only be made to substantial chassis components, preferably directly to the vehicle
battery.
6. Circuit breakers are very sensitive to high temperatures and will “false trip” when mounted in hot enviroments or
operated close to their capacity.
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines, vehicle
upholstery, etc. that could be damaged.
!
Caution!
MONITOR
EC7000B-WM
Screen Size
7” (4:3) and (16:9)
Controller
4 Camera
Voltage
12-32 VDC
Power
Approximate: 7W
Mirror Imaging
Yes (via Camera and Monitor Switch)
Resolution
800 (W) x RGB x 480 (H)
System
PAL/NTSC
Viewing Angle
L/R/U/D: 60º/60º/45º/60º
Visible Area
154X86mm
Contrast
400:1
Split Screen Feature
Quad View Split Screen
AV Compatible
No
DVR Compatible
No
Audio
No
Brightness
400cd/m2
Light Sensor
Auto Dim
Camera Selection
1-4 Via Trigger Wires
Connection: CAM
DC plug/2 wire
Connection (Monitor Pigtail)
Male 6pin/5 wire
Housing
Plastic
Mounting
Pedestal
Mech. Vibration
Pedestal Bracket - 3G
Weight
1.50 lbs / 0.67kg
Dimensions (WxHxD)
176(W) x 123(H) x 27(D)mm
Operating Temp
-4°F to 158°F / -20 to +70 oC
Remote Control
Yes
Approvals
FCC,CE,RoHS
Trigger voltage
12 - 32V
Distance
30 - 100 meters
CAMERA
EC2028-WC
Image
1/3 CCD
Voltage Requirement
12-32V
Effective Pixels
628(H) x 582(V)
Power Consumption
5W
Lens Size
1/4”
Lens Angle
120°Horizontal/90 Vertical
Audio
No
Light Sensor
Auto Switch B&W
Infrared LEDs
18
Housing
Aluminum Alloy
Mech. Vibration
8g
Mounting
Rear/Front
Weight
1.20 lbs / 0.54kg
Dimensions (WxHxD)
(L) 90x (W) 60.5x (T) 56.5 mm
Operating Temp.
-4°F to 158°F / -20 to +70 oC
IP Rating
IP66
Approvals
FCC,CE,RoHS
Current Consumption
500mA Max
Video Delay
150ms
Frame Rate
25fps
System
PAL