Page 2 of 2
© 2023 ECCO, Inc. All rights reserved.
920-0999-00 Rev. C
Manufacturer Limited Warranty and Limitation of Liability:
Manufacturer warrants that on the date of purchase, this product will conform to Manufacturer’s specifications for this product (which are available from the Manufacturer
upon request). This Limited Warranty extends for twelve (12) months from the date of purchase.
DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED MODIFICATIONS, FIRE OR
OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED IN ACCORDANCE WITH THE MAINTENANCE PROCEDURES SET
FORTH IN MANUFACTURER’S INSTALLATION AND OPERATING INSTRUCTIONS VOIDS THIS LIMITED WARRANTY.
Exclusion of Other Warranties:
MANUFACTURER MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED. THE IMPLIED WARRANTIES FOR MERCHANTABILITY, QUALITY OR FITNESS
FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE ARE HEREBY EXCLUDED AND SHALL NOT APPLY
TO THE PRODUCT AND ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ORAL STATEMENTS OR REPRESENTA-
TIONS ABOUT THE PRODUCT DO NOT CONSTITUTE WARRANTIES.
Remedies and Limitation of Liability:
MANUFACTURER’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDY IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR UNDER ANY OTHER THEORY
AGAINST MANUFACTURER REGARDING THE PRODUCT AND ITS USE SHALL BE, AT MANUFACTURER’S DISCRETION, THE REPLACEMENT OR REPAIR OF
THE PRODUCT, OR THE REFUND OF THE PURCHASE PRICE PAID BY BUYER FOR NON-CONFORMING PRODUCT. IN NO EVENT SHALL MANUFACTURER’S
LIABILITY ARISING OUT OF THIS LIMITED WARRANTY OR ANY OTHER CLAIM RELATED TO THE MANUFACTURER’S PRODUCTS EXCEED THE AMOUNT PAID
FOR THE PRODUCT BY BUYER AT THE TIME OF THE ORIGINAL PURCHASE. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR LOST PROFITS, THE
COST OF SUBSTITUTE EQUIPMENT OR LABOR, PROPERTY DAMAGE, OR OTHER SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES BASED UPON
ANY CLAIM FOR BREACH OF CONTRACT, IMPROPER INSTALLATION, NEGLIGENCE, OR OTHER CLAIM, EVEN IF MANUFACTURER OR A MANUFACTURER’S
REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER SHALL HAVE NO FURTHER OBLIGATION OR LIABILITY
WITH RESPECT TO THE PRODUCT OR ITS SALE, OPERATION AND USE, AND MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES THE ASSUMPTION OF
ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH PRODUCT.
This Limited Warranty defines specific legal rights. You may have other legal rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow the exclusion
or limitation of incidental or consequential damages.
An
ECCO SAFETY GROUP™
Brand
ECCOSAFETYGROUP
.com
833 West Diamond St, Boise, Idaho 83705
Customer Service
USA 800-635-5900
UK +44 (0)113 237 5340 | AUS +61 (0)3 63322444
ECCOESG
.com
Mounting:
Model comes complete with a magnet and a cigarette lighter plug.
PHOTOMETRIC SUMMARY TABLE
SEQUENCE
DESCRIPTION
FPM
STANDARD
AMBER
1
Single
120
SAE
CLASS 2A
2
Double
120
SAE
CLASS 2A
3
Triple
120
SAE
CLASS 2A
4
Rotate Slow
125
SAE
CLASS 2A
5
Rotate Fast
200
SAE
CLASS 2A
7 modes:
3 mods flash
• Single flash
•
Double flash
•
Triple flash
4 modes rotation
•
Slow anticlockwise rotation (480ms)
•
Slow clockwise rotation (480ms)
•
Quick anticlockwise rotation (300ms)
•
Quick clockwise rotation (300ms)
Operation:
How to resynchronize the lamp and controller?
1. Press the switch on light, within 1 second, press again and hold, until the green
indicator light flashes, then press the on/off on controller, starting pairing.
2.
When the red indicator flashes, press the pattern select button on controller,
finishing pairing.
3.
Now you can switch flash pattern by pressing switch on controller.
Notice:
During the pairing, if the controller is not pressed, light will be back to working
status in 6 seconds.
** When beacon is powered off and not in use after 45 minutes, the FOB and beacon
will need to be re-paired.
The Button
1. Long press three seconds ON/OFF
2. Press once to switch flash mode
Indicator Light
Pattern Select
ON/OFF
Charging port
DC 12V/24V
Enhanced magnetic
base