23
24
"
"
2. Link the cables as the picture
MAINTENANCE
BRAKE SYSTEM ADJUSTMENT
WARNING
"
When the battery is installed: be careful discharging wire and hang it,
ensure that the cross poles; when removing, first remove the negative (-)
motor controller, and install it as the final step of the installation. Do not
screw too tight, too vigorously can damage the battery casing and
Terminal.
CAUTION
"
1.
This vehicle has 4-wheel hydraulic
disc brake
s
.
2.
The brake distance is less than 4
meters (unload).
3. If the brake distance is more than 4 m,
please check the abrasion of the wheel
friction piece. If the thickness of the
brake piece is less than 2mm, then you
need to change a new one, if not, then
you need to adjust the screws
accompanied with the brake wire.
4. If the brake does not work or not
working well, please check if the
brake oil is used up or ask the
technician for further help!
"
MAINTENANCE
MAINTENANCE
Connect the Negative
electrode of Controller
Connect the switch of DC power
