EN
English
Test of audio output
Tap the button
START TEST.
A standard “white noise” sound should be played on all paired speakers.
Wait until the test sound stops.
Tap
Next
(upper right corner) when you are done.
Network configuration
In the Network configuration step, the system will detect that there is no internet connection.
Tap
Next
o start configuring your network.
Choose network
You will be presented with two choices: Wired or Wireless. Select which option you prefer.
For a wired connection, insert your network cable now.
For a wireless connection, press the “Connect to Network” button in order to start scanning for networks.
Please wait up to 20 seconds for the wireless network list to be presented. When the list shows, select
the network you’d like to connect to. The system will prompt you to enter your WiFi password. Now, the
system will disable Access Point mode and connect to your wireless network. The app will wait for this
process to complete and automatically try to locate and reconnect to the system.
If contact to the system has been lost at any point in time, make sure that your
phone/tablet and the system are on the same network. This means going back
to the Wi-Fi settings, and connecting to the system’s access point. If the system
does not present an access point, make sure that you select the same Wi-Fi
network as you’ve given in the app for the system to connect to.
