11
a)
Run the 4/9/25 point calibration.
b)
The touch screen driver is not installed properly, reinstall the driver.
7.
The cursor fixed at the edge of LCD
a)
Check if the edge of the screen is being pressed by something.
b)
Check the edges of the LCD if there is anything jammed in the front bezel.
c)
Make sure the touch screen is clean.
8.
The cursor in the touch screen can only move in a small area or touch
positions are inaccurate.
a)
This situation usually occurs first time after install ing the driver. Please run
the touch screen calibration program. We also recommend you to do this
after changing monitor resolution.
b)
Run the touch screen calibration program to do a 25-point recalibration.
Limited Warranty Policy
The EC-1519I3 POS terminal features a one-year-limited warranty with free change
in the first 2 months from the date of purchase. If product is determined to be
defective, we will repair or replace the product with refurbished or remanufactured
parts or components during the warranty period.
This warranty is valid only for the first consumer purchaser.
This warranty does not cover cosmetic damage or damage due to acts of God, accident,
misuse, abuse, negligence, commercial use or modifications of, or to any part of the
product.
This warranty does not cover damage due to improper operation or maintenance,
connection of improper voltage supply, or attempted repair by anyone other than a
