Chengdu Ebyte Electronic Technology Co.,Ltd.
NA111 User Manual
Copyright ©2012–2021
，
Chengdu Eyrth Electronic Technology Co., Ltd
5
2.3.3 Data transfer test
After the above steps, follow the device factory default parameters, do the following, to achieve
data transmission testing.
Here's how:
（
1
）
Open the test TCP/IP debugging assistant software.
（
2
）
The network settings area selects the TCP client mode, which corresponds to the server
IP address (module default target IP: 192.168.3.3). The server port number corresponds to the
module setting port 8887 (module default port: 8887), click Create.
（
3
）
Wait for the computer to connect to the serial server, the connection is complete after the
serial server M0 (green LED lit).
Figure 2- 3 Gate parameter configuration
（
4
）
Open serial assistant, serial port rate is set to 115200, serial parameters are set to
None/8/1, click on open, open serial port.
