Ebyte ME31-XAXX0600, Руководство пользователя

Страница: 7 / 30

Chengdu Ebyte Electronic Technology Co.,Ltd ME31-XAXX0600_UserManual_CN
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd
4
original signal. Therefore, a terminal resistance must be added at the end of the transmission line to prevent the
signal from being reflected after reaching the end of the transmission line. The terminal resistance should be the
same as the impedance of the communication cable, with a typical value of 120 ohms. Its function is to match the
bus impedance and improve the anti-interference and reliability of data communication.
2.2.1 AI analog input connection
2.2.2 Simple use
Wiring: The computer is connected to the RS485 interface of ME31-XAXX0600 through USB to RS485, A is connected to A, B is connected to B.
Networking: Insert the network cable into the RJ45 port and connect to the PC.
Power supply: Use DC-12V switching power supply (DC 8~28V) to supply power to ME31-XAXX0600.
2.3 Parameter configuration
Step 1: Modify the IP address of the computer to be consistent with the device. Here it is modified to 192.168.3.100
to ensure the same network segment as the device and that the IP is different. Please turn off the firewall and try
again if the step failed;